Internal Door manufacturing is a very demanding sector. Doors can be produced in different models and colors and can be produced in different sizes. It is for sure that there are standard door sizes that are specified by standardization organizations for the manufacture of interior doors. However, different sizes of doors can be demanded according to customer's requests. The cost of the interior door varies according to the properties of the material used in door manufacturing. Some are more affordable because some are more expensive. This completely depends on the structure of the material we will use at door manufacturing. Therefore, it will be good to contact us to get more information about the cost of interior door manufacturing
As Evkap, our doors, which are produced using sustainable and recycled materials, are offered to your appreciation with the most reasonable and competitive prices.
If you are looking for contemporary internal doors manufacturer Evkap is the right choice for you. Because Evkap manufacturing an extensive range of cheap internal doors.
On our website, you can find the perfect home base internal doors with glass or without glass.
What are the standard sizes of internal doors?
The doors are normally mass-produced and have standard dimensions. The sizes can be changed according to needs but construction standards are mostly stated by countries and there are some different standard sizes of internal doors. So the standards of dimensions may vary from country to country. The narrowest internal door dimensions are generally 762 mm x 1981 mm.
For example, in the United States, the height of passage doors must be a minimum of 80 inches (200mm). The width standards for interior doors are 24, 28, 30, 32, and 36 inches ( 600, 710, 760, 810, and 910 mm). Of course, there are some other regulations like for disabled doors or the thickness of doors.
In Turkey, according to the Turkish Standardisation Organization (TSE), the minimum width should be 800-900 mm and the height should be between 1800-2500 mm. TSE standards are mostly the same as European standards.
How much do wood veneer doors cost?
As mentioned above, door costs may vary. Here we will give you information about the wood veneer door. For more information about the cost of wood veneer doors and to place an order, just contact us.
What is a wood veneer?
Wood veneers are natural veneers obtained from wood surfaces at specific thicknesses using special machines. These types of coatings are bonded onto 6 mm MDF by special treatment to form the surface used in wooden coated doors.
What is the production process of the veneered door?
The wooden veneer door is manufactured from three main materials. Seren is a 30 × 50 mm sized solid wood part enclosing all four sides of the door, attached to the neck and joined by a finger joint system and glue. The inner filler is a paper honeycomb that is applied to the body of the door for supporting purposes and increases the resistance of the door and at the same time makes it light. The wooden surface is made of a 6 mm thick MDF panel with the desired wood door pattern and color. Sizing is done before edge banding. Lock and door handle locations are opened. In wooden veneer doors, the surface is polished. The production of wooden veneer doors, frame pile using the bushes, honeycomb filling, and pressing of the wooden door surface by gluing, sizing, edge band application, the opening of lock and door handle places, dust and debris removal is carried out as packaging.
What are the technical properties of wood veneer?
The thickness of the wood veneer door leaf is 42 mm, the thickness of the MDF panel is 6 mm and the thickness of the greenhouse is 30 mm. Edge pavers are obtained from solid spruce or fir wood resistant to moisture between 10% and 14%. This frame is reinforced with lock and hinge areas and honeycomb filling made of Kraft paper with air holes is placed.
Wooden veneer door surfaces do not require paint. Wood veneer door models can only be polished. The wooden door leaf is prepared in dimensions of 90 × 209 cm. Besides, it can be produced in desired dimensions as room and WC door. It is also possible to produce the desired width as double wings.
What are the advantages of wood veneer doors?
Wooden veneer doors are more economical than other solid door models in terms of price. The appearance is no different from the wooden door because it is a natural wood veneer. Since the surface of the door is natural wood, it gives a real tree feel. It has a stylish appearance. Hygienic, easy to maintain and install. It is resistant to sun rays and scratches and impacts. Long life. Wood veneer alternatives offer a wide range of options. Wooden doors are suitable for indoor use in all areas.
There are 7 kinds of interior door manufacturing:
- Panel doors,
- Melamine doors
- PVC doors,
- Lacquer doors,
- Wood veneer doors,
- Laminate doors
- Composite doors.
These are the most common interior doors in Turkey. The most preferred ones are American, melamine, composite, and lacquer doors. The American doors are mass-produced, easily installed, and cheap, which makes these most preferred between them. The composite doors are water-proof and well-isolated which makes these preferred for wet-floored places like toilets and bathrooms.
Interior doors are produced by using the MDF surface coated with different materials. The American panel door surface is made of painted HDF (3.2 mm). The melamine door is manufactured using a 4 mm MDF surface with melamine coating. PVC door is obtained by gluing PVC foil on 4 mm or 6 mm MDF in the membrane device. The lacquer door surface consists of 6 mm MDF with primer and sandpaper followed by polyurethane paint. In the production of wood veneer doors, a 6 mm MDF surface with natural wood veneer is used. The laminate door is obtained by applying a laminate coating on 4 mm MDF.
The main materials used in the production of room doors are; wood, paper honeycomb, wire punch, raw or coated MDF and HDF, glue, edge band, paint, and varnish types and winding material (wood, melamine, PP, PVC, and micro laminate). The inner frame of the wing is formed by using finger joint bushes obtained from spruce or fir. Additional coils are used to strengthen the lock and hinge areas. The bushes are joined using a wire punch, and the inside of the flap is coated with a paper honeycomb filler which provides light and pressure resistance.
The MDF layer forming the surface of the wing has adhered to the mainframe in a hot or cold press. MDF surface types are available in wood veneer, PVC, melamine, laminate, and lacquer. Painted HDF is used as the American panel door surface. Edge banding is done according to the model of the door. The main material of the door frame consists of 3 laminated MDF (36 mm) or 2 MDF and a sandwich panel (42 mm) obtained from a solid layer. Door moldings are available in three different thicknesses: 9-12-18 mm MDF. The casing and moldings are wrapped with material matching the wing surface coating.
Advantages and Disadvantages of Wooden Door
Wooden doors are one of the most preferred types due to the aesthetic properties of wood. Wood is the oldest construction element in the world. The reason it has been preferred this much is that it can be supplied so easily. It is also flexible and insulative that humankind used it for protection against the meteorologic conditions of our world.
As the world is industrialized in the last century, natural resources are diminishing so fast and people invented new materials to replace wood. Today there are so many other industrialized and mass-produced materials for doors like composite, metal, steel, etc. Before choosing your door let's see the advantages and disadvantages of wooden doors:
- Wood is a wonderful insulator of heat
- It is a natural resource that is so healthy
- It can be found easily, there is no need for a process of anything
- The price is cheaper than other kinds of materials
- Wood has a low cost of maintenance
- Wood doesn't rust
- It is flexible and can easily be shaped when compared to other materials
- Wood is also a good noise insulator
- If the quality is good enough, the door will be a lifelong product
- Wood can easily consume moist that can result in rot
- Wood can be infested by termites and other types of insects
- Some good quality woods can be expensive
- Termite infestation can cause allergy of the users
- As we can see, good maintenance can prevent us from these disadvantages. Wood is still the most preferred, healthy, and cheap material for the doors. You can check our catalog and can decide the best choice that fits your taste
Tips About How to Clean Your Door
Doors are a part of your house and they have a direct effect on the beauty of your home. The new type of doors are stylish, good looking and they need to be cleaned and looked after to keep them functional and fancy. These types of doors get affected by dust and they are needed to be cleaned regularly. So here are some cleaning tips according to their types:
The white door is not a type of door. It can be an American, lacquer, or a composite door, but the color white need to be cured differently. White doors can get dirty easier than other colors because white can not hide anything. So you should take care of them specially. First of all, you should not use bleach time chemicals to clean white doors. You should use a hard sponge or some special swab designed for this. You should use water with soup instead of a chemical. But there are some other interesting tips about cleaning too:
You can use a raw potato to clean the stains on the door.
Also, you can use boiled onions to clean the yellow dots on your door.
Lacquer Door Cleaning
You should be so careful while cleaning because lacquer can get harmed easily. You can take a bucket of warm water, pour some wood cleaner in it and make the cleaning with a micro-fiber swab. You may also use vinegar instead of a wood cleaner.
Wood Door Cleaning
Wood door cleaning is the same as lacquer door. Only you should use another swab after cleaning to make the wood dry. You can also use vinegar instead of a wood cleaner.
Panel Door Cleaning
You should not use common chemicals like bleachers for cleaning panel doors. You should prepare special water with soup, clean the door with a swab and soupy water and use another swab to make the door dry. You should not leave the door wet, because it may lead to moisture.
These are cleaning tips for some type of door. You may have further assistance from our experienced personnel at any time. Just contact Evkap Door, and we will be happy to help you.